Thruster, Hydraulic, 1400 Kg Thrust/610 Mm Tunnel 160cc Piston Motor, Cr Bronze Q-props/oilfed Leg - Sh1400/610-b160

Thruster, Hydraulic, 1400 Kg Thrust/610 Mm Tunnel 160cc Piston Motor, Cr Bronze Q-props/oilfed Leg - Sh1400/610-b160

Sleipner SH1400 hydraulic thruster with 160cc/rev bent axis piston motor - 24" (610 mm) tunnel ID. Maximum thrust: 1400 kgf (3,085 lbf)

Twin Counter-rotating Bronze 5-blade "Q-Props"

Sleipner's dual, counter-rotating "Q" props provide maximum efficiency, coupled with the streamlined profile of the gear-leg in a 24" tunnel. The dual props offer equal thrust in both directions, and the Proportional controller system provides not only smooth acceleration, but also provides the safety of a momentary delay when switching directions to avoid an impact load on the gears.

On-Water oil service: All thrusters with tunnel diameter 513 and 610mm can be prepared for an on-water oil change, eliminating the need for hauling the vessel. Please specify this feature when ordering.

A complete Sleipner engineered system allows full proportional control of the thruster and unlimited run time, all based on the S-Link plug and play system. Learn more about Sleipner hydraulic thruster systems. Contact your local Sleipner representative for a system tailored to your needs.

Features

• Wide range of hydraulic motor sizes and types to optimize performance of the thruster unit
• Unlimited run time at any thrust level, including maximum thrust
• Oil fed gearleg provides positive pressure against sea-water ingress
• Reduced long term maintenance when compared to DC or AC thrusters
• Total integration into any hydraulic system or supplied as part of a Sleipner engineered system

Performance

• Propulsion technology know-how, maximizing amount of thrust from the system
• Bronze 5-blade Q-props offer durable, long life, quiet operation, and equal thrust in both directions.
• Streamlined gear housing, which minimizes turbulence in the tunnel and maximizes flow

Installation

• Compact size to reduce the amount of interior volume needed
• Simple Plug and Play wiring for control system
• Easily accessible hose connections
• Fast and safe propeller mounting with lock nut
• Easy access zinc anodes allow quick and simple changing
• Safety and Reliability
• Mechanical protection of drive gear through flexible coupling between gearleg and motor

Specifications:

• Thrust Ouput: 1,400 kgf (3,085 lbf)
• Pressure at Motor: 257 bar (3,725 psi)
• Flow to motor: 187.3 lpm (49.5 gpm)
• Tunnel Diameter (ID): 610 mm (24")
• Hydraulic Power: 107 hp (80.1 kW)

ATTENTION CALIFORNIA RESIDENTS

WARNING: Cancer and Reproductive Harm