S-link Display Interface For Mfd, Please Consult Mfd Manufacturers For Information On Compatibility - Smsdi-1

S-link Display Interface For Mfd, Please Consult Mfd Manufacturers For Information On Compatibility - Smsdi-1

The S-Link™ Display Interface (SDI-1) activates a Sleipner app on Multi-Functional Displays (MFD). The app enables monitoring and configuration of thruster and stabilizer systems: 

• Activate stabilizers and adjust gain
• Monitor thruster operation and status
• Observe and clear active alarms

Works with compatible MFDs from Raymarine, Garmin, Simrad, B&G, and Lowrance. Please consult MFD manufacturers for information on compatible models before purchase. 

Features

SDI-1 connects easily to the S-Link™ bus with an S-Link™ spur cable and has a standard RJ45 Ethernet port for connection to MFDs. Some MFDs require a special Ethernet adapter cable. One SDI-1 can interface with multiple MFDs on the same network.

The supplied power cable must power SDI-1.

At least one Sleipner control panel must be installed to configure thruster and stabilizer systems.

Supplied in the package:

• 1 x 2-meter power cable
• 1 x 2-meter ethernet cable
• Fastenings screws
• User and installation manual

Specifications:

• Manufacturers Part No: SMSDI-1
• Control Options: Proportional Controls

ATTENTION CALIFORNIA RESIDENTS

WARNING: Cancer and Reproductive Harm